Micro-Blaze® PPE DE-CON Cleaner

SKU N/A CATEGORY

Micro-Blaze® PPE DE-CON Cleaner

A safe, non-toxic agent for cleaning and decontaminating firefighting gear.

* Removes and remediates harmful organic contaminants

* Use on turnout gear, hoods, gloves, uniforms, equipment

* Ensure your gear is clean and healthy

Clear
Share on email
Email
Share on print
Print

A safe, non-toxic agent for cleaning and decontaminating firefighting gear.

* Removes and remediates harmful organic contaminants

* Use on turnout gear, hoods, gloves, uniforms, equipment

* Ensure your gear is clean and healthy

Description

The old days of wearing your dirty bunker gear as a badge of honor are over.  Research spanning decades shows that firefighters have significantly higher rates of cancer due to their occupational exposure to toxic chemicals.  Ensure that your PPE and bunker gear is as clean as possible by using Micro-Blaze® PPE DE-CON Cleaner after each use.  In doing so, we can help reverse the rising cancer rate among firefighters by removing the toxic carcinogens from PPE and bunker gear.

Micro-Blaze® PPE DE-CON Cleaner is a completely safe, non-toxic formulation of biological activators and selected all-natural and non-pathogenic microbes that break down, remove and digest organic contaminates on uniforms, turnout gear, hoods and gloves.

The numerous strains of microbes in Micro-Blaze® PPE DE-CON Cleaner provide a synergistic degradation of the organic and hydrocarbon pollutants.  Its proprietary combination of wetting agents, nutrients, and microbes make it an ideal formulation for cleaning and decontaminating firefighting gear.

Application

Handwashing / Pre-soaking

  1. Mix the MBPPE with water at a rate of 2 ounces of MBPPE for every 1 gallon of water
  2. Place uniforms, turnout gear, hoods and gloves in the diluted solution to soak for as long as necessary to degrease and decontaminate gear (recommended soak time is approximately 1 hour)
  3. For stubborn stains, lightly scrub with a soft bristle brush
  4. Remove gear from diluted solution and rinse with water
  5. Thoroughly ring out gear and hang to dry.  Uniforms, gloves and hoods can be placed in a dryer for faster drying

Machine washing

For best results, pre-soak according to instructions above

If pre-soaked:

  1.  Place gear into washing machine and use usual wash/rinse cycle with no additional MBPPE added
  2. Hang gear to dry or place in dryer

If NOT pre-soaked:

  1.  In washing machine add 4-8 ounces of MBPPE per load and wash on usual wash/rinse cycle at 120° or below
  2. Hang gear to dry or place in dryer

Documents

Product brochure

MSDS

Related products